Ran linters on all files and added codespell (#13)

.gitignore

@@ -4,6 +4,9 @@
 # Deployment config
 config/production/deployment.toml
 
+# Hugo build lock
+.hugo_build.lock
+
 # yarn
 .pnp.*
 .yarn/*

.pre-commit-config.yaml

@@ -3,7 +3,7 @@
 # See https://pre-commit.com/hooks.html for more hooks
 repos:
   - repo: https://github.com/pre-commit/pre-commit-hooks
-    rev: v4.0.1
+    rev: v4.1.0
     hooks:
       - id: trailing-whitespace
       - id: end-of-file-fixer
@@ -14,13 +14,18 @@ repos:
             .*\.cjs
           )$
   - repo: https://github.com/pre-commit/mirrors-eslint
-    rev: v7.32.0
+    rev: v8.5.0
     hooks:
       - id: eslint
   - repo: https://github.com/pre-commit/mirrors-prettier
-    rev: v2.4.1
+    rev: v2.5.1
     hooks:
       - id: prettier
         additional_dependencies:
           - prettier@2.4.1
           - prettier-plugin-go-template@0.0.11
+  - repo: https://github.com/codespell-project/codespell
+    rev: v2.1.0
+    hooks:
+      - id: codespell
+        types: [markdown]

archetypes/default.md

@@ -3,4 +3,3 @@ title: "{{ replace .Name "-" " " | title }}"
 date: {{ .Date }}
 draft: true
 ---
-

config/production/deployment.toml.sample

@@ -19,4 +19,3 @@ gzip = false
 [[matchers]]
 pattern = "^.+\\.(html|xml|json)$"
 gzip = true
-

content/posts/X1C6-arch-linux-install.md

@@ -14,7 +14,7 @@ I recently picked up a 6th gen X1 Carbon so of course I wanted to install Arch L
 in case I ever have to do this again. I used [ejmg's
 guide](https://github.com/ejmg/an-idiots-guide-to-installing-arch-on-a-lenovo-carbon-x1-gen-6) guide, [HardenedArray's gist
 guide](https://gist.github.com/HardenedArray/ee3041c04165926fca02deca675effe1), and the [Arch Linux wiki
-page](https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_6)) as references.
+page](<https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_6)>) as references.
 
 _Note_: This was my setup as of July 2020ish. Things have changed since then.
 
@@ -22,7 +22,7 @@ _Note_: This was my setup as of July 2020ish. Things have changed since then.
 
 ### Prepare Installation Media
 
-This part is relatively straighforward. Check out the [arch wiki
+This part is relatively straightforward. Check out the [arch wiki
 page](https://wiki.archlinux.org/title/USB_flash_installation_medium).
 
 ### Prepare BIOS
@@ -62,18 +62,18 @@ commands.
 
 ### Partition Drive
 
-My device had two SSDs installed. `lsblk` showed them as `nvme0n1` and `nvme1n1`. My primary SSD was `nvme1n1` so I ran `gdisk
+My device had two SSDs installed. `lsblk` showed them as `nvme0n1` and `nvme1n1`. My primary SSD was `nvme1n1` so I ran
-/dev/nmve1n1`. You can enter `?` to get a list of commands. I went ahead and deleted (`d`) all the existing partitions. Created an
+`gdisk /dev/nmve1n1`. You can enter `?` to get a list of commands. I went ahead and deleted (`d`) all the existing partitions.
-EFI partition (`n`) on partition 1 with a size of 100 MiB (chose first sector and then `+100M` for the last sector) with hex code
+Created an EFI partition (`n`) on partition 1 with a size of 100 MiB (chose first sector and then `+100M` for the last sector)
-EF00 (EFI partition). I created partition 2 to span the rest of the device. I tried having a separate boot partition but ran into
+with hex code EF00 (EFI partition). I created partition 2 to span the rest of the device. I tried having a separate boot partition
-issues getting my system to boot up properly. It's probably possible to have a separate boot partition but it probably makes the
+but ran into issues getting my system to boot up properly. It's probably possible to have a separate boot partition but it
-setup more complex. So, unless you know what you're doing, don't create any other partitions on this drive.
+probably makes the setup more complex. So, unless you know what you're doing, don't create any other partitions on this drive.
 
 For my second drive I ran `gdisk /dev/nvme0n1` and left a single partition spanning the entire device with hex code 8300 (Linux
 FS). This drive can be partitioned however you like.
 
-I should zero my devices but I'm not that paranoid so I didn't. This could be done with `ddrescue` or with `cat` like so `cat
+I should zero my devices but I'm not that paranoid so I didn't. This could be done with `ddrescue` or with `cat` like so
-/dev/zero > /dev/nvme1n1 && cat /dev/zero /dev/nme0n1`.
+`cat /dev/zero > /dev/nvme1n1 && cat /dev/zero /dev/nme0n1`.
 
 ### Setup filesystems
 
@@ -119,7 +119,6 @@ lvcreate -l 100%FREE Data -n root
 
 Create a FAT32 filesystem for the EFI partition, set up the swap partition, and format the rest with ext4.
 
-
 ```bash
 mkfs.vfat -F 32 /dev/nvme1n1p1
 mkswap /dev/mapper/Arch-swap
@@ -245,7 +244,7 @@ Secondary      /dev/nvme0n1p1                               /crypto_keyfile.bin
 ```
 
 The `discard` option has to do with the `TRIM` command and is basically a performance optimization. Read more about it on
-[wikipedia](https://en.wikipedia.org/wiki/Trim_(computing)).
+[wikipedia](<https://en.wikipedia.org/wiki/Trim_(computing)>).
 
 Edit the `mkinitpcio` configuration file (`/etc/mkinitpcio.conf`) to setup decryption.
 
@@ -294,7 +293,7 @@ either).
 
 ### First Logon
 
-Log in to your system as root and alow users in the wheel group to use `sudo`. Run `visudo`, if you get an error saying no editor
+Log in to your system as root and allow users in the wheel group to use `sudo`. Run `visudo`, if you get an error saying no editor
 found just prepend the editor's path like this `EDITOR=/usr/bin/vim visudo`. Uncomment the following line `%wheel ALL=(ALL) ALL`.
 You can log out and log in with your own user account now.
 
@@ -396,6 +395,7 @@ cp /etc/sway/config ~/.config/sway
 mkdir -p ~/.config/waybar
 cp /etc/xdg/waybar/* ~/.config/waybar
 ```
+
 I edited my sway config to mimic my i3 config so I needed to grab a few packages first.
 
 ```bash
@@ -419,7 +419,7 @@ echo "export MOZ_ENABLE_WAYLAND=1" >> ~/.zprofile
 
 After restarting sway, I was able to run Firefox. I ran into my next issue (seems like a recurring theme) soon after. Everything
 on the screen seemed too big. The scaling factor for my display was too large (first world problem, I know). Luckily for me sway
-supports (but doesn't reccommend) fractional scaling. I got my display's name using `swaymsg`.
+supports (but doesn't recommend) fractional scaling. I got my display's name using `swaymsg`.
 
 ```bash
 swaymsg -t get_outputs
@@ -511,8 +511,9 @@ export SSH_AUTH_SOCK
 sway
 ```
 
-Store spotify password in keystore `secret-tool --label='Spotify' application rust-keyring service spotifyd
+Store spotify password in keystore
-username <your-username>`. You'll be prompted to create a default keyring if one hasn't already been created.
+`secret-tool --label='Spotify' application rust-keyring service spotifyd username <your-username>`. You'll be prompted to create a
+default keyring if one hasn't already been created.
 
 Create systemd unit file and run spotifyd
 
@@ -537,7 +538,7 @@ alias config='/usr/bin/git --git-dir=$HOME/.myconf/ --work-tree=$HOME'  # Add th
 ```bash
 yay -S light
 usermod -a -G video alejandro  # need to be in video group to control backlight
-# below 2 reload udev rules, so light doesn't requre root permissions
+# below 2 reload udev rules, so light doesn't require root permissions
 sudo udevadm control --reload-rule
 sudo udevadm trigger
 # Above 2 commands didn't work for me, but did after a reboot

content/posts/hosting-static-site-aws.md

@@ -98,17 +98,21 @@ Prepare a json file to add the required CNAME.
 
 ```json
 {
-    "Changes": [{
+  "Changes": [
+    {
       "Action": "CREATE",
       "ResourceRecordSet": {
         "Name": "<name shown in last command>",
         "Type": "CNAME",
         "TTL": 300,
-            "ResourceRecords": [{
+        "ResourceRecords": [
+          {
             "Value": "<value show in last command>"
-            }]
           }
-    }]
+        ]
+      }
+    }
+  ]
 }
 ```
 
@@ -132,9 +136,7 @@ for the JSON required is below. The region name is whatever was configured when
 {
   "Aliases": {
     "Quantity": 1,
-        "Items": [
+    "Items": ["<your domain name here>"]
-            "<your domain name here>"
-        ]
   },
   "DefaultRootObject": "index.html",
   "Origins": {
@@ -153,11 +155,7 @@ for the JSON required is below. The region name is whatever was configured when
           "OriginProtocolPolicy": "http-only",
           "OriginSslProtocols": {
             "Quantity": 3,
-                        "Items": [
+            "Items": ["TLSv1", "TLSv1.1", "TLSv1.2"]
-                            "TLSv1",
-                            "TLSv1.1",
-                            "TLSv1.2"
-                        ]
           },
           "OriginReadTimeout": 30,
           "OriginKeepaliveTimeout": 5
@@ -192,16 +190,10 @@ for the JSON required is below. The region name is whatever was configured when
     "MinTTL": 0,
     "AllowedMethods": {
       "Quantity": 2,
-            "Items": [
+      "Items": ["HEAD", "GET"],
-                "HEAD",
-                "GET"
-            ],
       "CachedMethods": {
         "Quantity": 2,
-                "Items": [
+        "Items": ["HEAD", "GET"]
-                    "HEAD",
-                    "GET"
-                ]
       }
     },
     "SmoothStreaming": false,
@@ -276,7 +268,8 @@ Prepare a json file for the Route 53 request. Fun fact: `HostedZoneId` is hardco
 
 ```json
 {
-    "Changes": [{
+  "Changes": [
+    {
       "Action": "CREATE",
       "ResourceRecordSet": {
         "Name": "<your domain name here>.",
@@ -287,7 +280,8 @@ Prepare a json file for the Route 53 request. Fun fact: `HostedZoneId` is hardco
           "EvaluateTargetHealth": false
         }
       }
-    }]
+    }
+  ]
 }
 ```
 

content/posts/no-referrals-please.md

@@ -8,8 +8,8 @@ draft = false
 
 ### TL;DR
 
-* Use `same-origin` Referrer Policy with Django
+- Use `same-origin` Referrer Policy with Django
-* Double leters are unecesary and slow down typing ([see Referer in this document](https://tools.ietf.org/html/rfc1945))
+- Double leters are unecesary and slow down typing ([see Referer in this document](https://tools.ietf.org/html/rfc1945))
 
 ---
 
@@ -25,7 +25,7 @@ that users are more likely to have the fonts already cached (making my site load
 
 But, what's this referrer business? Turns out that browsers send information on what page a user comes from. This information is
 stored in the headers under the `Referer` field. Yes, _referer_ and not _referrer_. According to wikipedia, [this
-mispelling](https://tools.ietf.org/html/rfc1945) [is found](https://tools.ietf.org/html/rfc2616) in [multiple
+misspelling](https://tools.ietf.org/html/rfc1945) [is found](https://tools.ietf.org/html/rfc2616) in [multiple
 RFCs](https://tools.ietf.org/html/rfc7231).
 
 This information seems pretty innocuous, but can be used (in tandem with other techniques) to track people online. Sites can

content/posts/running-travis-ci-locally.md

@@ -7,9 +7,9 @@ tags = ["procrastination"]
 
 ### TL;DR
 
-* Travis build was failing.
+- Travis build was failing.
-* Found a possible fix, but I didn't want to push commits just to check if it would work.
+- Found a possible fix, but I didn't want to push commits just to check if it would work.
-* Ran [travis-build](https://github.com/travis-ci/travis-build) in a Docker container to test the fix.
+- Ran [travis-build](https://github.com/travis-ci/travis-build) in a Docker container to test the fix.
 
 ---
 
@@ -30,7 +30,7 @@ The command "pip install -r requirements.txt" failed and exited with 1 during .
 Your build has been stopped.
 ```
 
-Well at least *my* code didn't break anything. But hey, it's a Sunday and I have chores to ignore. Let's look into this. I googled
+Well at least _my_ code didn't break anything. But hey, it's a Sunday and I have chores to ignore. Let's look into this. I googled
 the error and stumbled upon a [comment on Github](https://github.com/psycopg/psycopg2/issues/594#issuecomment-346514672) stating
 that the fix was to update the psycopg2 requirement to 2.7.1 (the current latest version). Great, that should be an easy fix. But
 hang on, I have all these chores to ignore. I can probably run Travis locally before pushing just to verify the fix. Let's look
@@ -66,8 +66,9 @@ Here are the steps that worked for me. I hope this is useful for someone else so
 First off, we'll need to decide on one of Travis's docker containers to run from. Available containers are [listed on
 Quay](https://quay.io/organization/travisci). We'll want one of the containers named `travis-<some language>`. I copy-pasted from
 the instructions in the Medium article so I ended up running everything under the `travis-jvm` container. In retrospect, I should
-have used `travis-python` since I was dealing with a Python project. The command `docker run -it -u travis
+have used `travis-python` since I was dealing with a Python project. The command
-quay.io/travisci/travis-jvm /bin/bash` can be used to run the container (replace `travis-jvm` with whatever container is desired).
+`docker run -it -u travis quay.io/travisci/travis-jvm /bin/bash`
+can be used to run the container (replace `travis-jvm` with whatever container is desired).
 
 Before setting up `travis-build` we can choose which version of Ruby to work with. The latest stable version was 2.4.3 when I
 checked so I decided to go with that.
@@ -149,4 +150,3 @@ as I had hoped :) .
 This process is pretty convoluted but I think I can automate this and include it a container for my project. But, maybe I'm better
 off using something like Jenkins for CI if I'm so concerned with running my builds locally. At least I can feel like I did
 something productive while avoiding my chores.
-

layouts/partials/comments.html

@@ -1,8 +1,9 @@
-<script src="https://utteranc.es/client.js"
+<script
+  src="https://utteranc.es/client.js"
   repo="alejandro-angulo/alejandr0angul0.dev"
   issue-term="pathname"
   label="blog comment"
   theme="dark-blue"
   crossorigin="anonymous"
-    async>
+  async
-</script>
+></script>

themes/alejandro-angulo/layouts/404.html

@@ -6,6 +6,7 @@
 </pre>
 
   <p>
-	<a href="{{ .Site.BaseURL  }}">Go home</a> or use the navigation at the top to navigate to another page.
+    <a href="{{ .Site.BaseURL }}">Go home</a> or use the navigation at the top
+    to navigate to another page.
   </p>
 {{ end }}

themes/alejandro-angulo/layouts/_default/list.html

@@ -1,10 +1,8 @@
 {{ define "main" }}
   <h1>{{ .Title }}</h1>
-{{ range .Pages.ByPublishDate.Reverse }}
-<p>
   <h3><a class="title" href="{{ .RelPermalink }}">{{ .Title }}</a></h3>
+  {{ range .Pages.ByPublishDate.Reverse }}
     {{ partial "metadata.html" . }}
     <p class="summary">{{ .Summary }}</p>
-</p>
   {{ end }}
 {{ end }}